TMC ET4000 manual Additional Information Adjusting Flash Length

Models: ET4000

1 92
Download 92 pages 51.22 Kb
Page 81
Image 81

Additional Information

Adjusting Flash Length

1Press PROGRAM.

- The display will read “Program...”

2Press the soft key under NEXT repeatedly, until “Advanced Setting” appears in the display, and then press

ENTER.

3Press the soft key under NEXT repeatedly, until “Flash Length” appears in the display, and then press

ENTER.

The display will show the currently set flash length.

4Press the soft key under CHANGE repeatedly, until the desired flash length is displayed.

The choices are:

Length:100ms (100 milliseconds) Length:300ms Length:700ms (factory setting) Length:1 second

5Press PROGRAM to exit.

Your EPIC telephone is factory-set to have a flash length of 700 milliseconds, which is appro- priate for most environments. However, if your installation requires a longer or shorter flash length, you may change the length to 100 mil- liseconds, 300 milliseconds, or 1 second.

71

Page 81
Image 81
TMC ET4000 manual Additional Information Adjusting Flash Length