Topcom WBR 7101GMR manual Parameters Description Host Address

2.1.3 Remote Management

The remote management function allows you to designate a host in the Internet the ability to configure the Broadband router from a remote site. Enter the designated host IP Address in the Host IP Address field.

Parameters	Description
Host Address	This is the IP address of the host in the Internet that will have
	management/configuration access to the Broadband router from a
	remote site. This means if you are at home and your home IP address
	has been designated the Remote Management host IP address for this
	router (located in your company office), then you are able to configure
	this router from your home. If the Host Address is left 0.0.0.0 this means
	anyone can access the router’s web-based configuration from a remote
	location, providing they know the password.
	Click the Enabled box to enable the Remote Management function.
	Note: When you want to access the web-based management from a
	remote site, you must enter the router’s WAN IP address (e.g. 10.0.0.1)
	into your web-browser followed by port number 8080, e.g. 10.0.0.1:8080
	(see below). You’ll also need to know the password set in the Password
	Setting screen in order to access the router’s web-based management.

Port The port number of remote management web interface.

33