Edit a QoS rule | Select the rule you want to edit and click “Edit”, |
| then you will enter the detail form of the QoS |
| rule. Click “Apply” after editing the form and the |
| rule will be saved. |
Adjust QoS rule priority | You can select the rule and click “Move Up” to |
| make its priority higher. You also can select the |
| rule and click “Move Down” to make its priority |
| lower. |
|
|
Edit QoS Rule:
You can assign packet classification criteria by its local IP range, remote IP range, traffic type, protocol, local port range and remote port range parameters. The parameters that you leave as blank will be ignored. The priority of this rule will be applied to packets that match classification criteria of this rule. You can limit bandwidth consumed by packets that match this rule or guarantee bandwidth required by packets that match this rule.
Parameters | Description |
Rule Name | The name of this rule. |
Bandwidth | You can assign the download or upload |
| bandwidth by the unit of Kbps (1024 bit per |
| second). You can limit the maximum bandwidth |
| consumed by this rule by selecting “Maximum”. |
| You also can reserve enough bandwidth for this |
| rule by selecting “Guarantee”. |
58
