Topcom WBR 7101GMR manual

want remove all PCs from the table, just click "Delete All" button.

Filter client PC by MAC address Check “Enable MAC Filtering” to enable MAC

	Filtering.
Add PC	Fill in “Client PC MAC Address” and “Comment”
	of the PC that is allowed to access the Internet, and
	then click “Add”. If you find any typo before
	adding it and want to retype again, just click
	"Reset" and the fields will be cleared.
Remove PC	If you want to remove some PC from the "MAC
	Filtering Table", select the PC you want to remove
	in the table and then click "Delete Selected". If you
	want remove all PCs from the table, just click
	"Delete All" button. If you want to clear the
	selection and re-select again, just click “Reset”.

You can now configure other advance sections or start using the router (with the advance settings in place)

76