Topcom WBR 7101GMR manual Address host in your LAN

Public Port	Enter the service (service/Internet application) port number
	from the Internet that will be re-directed to the above Private IP
	address host in your LAN
	Note: Virtual Server function will have priority over the DMZ
	function if there is a conflict between the Virtual Server and the
	DMZ settings.
Comment	The description of this setting.
Add Virtual Server	Fill in the "Private IP", "Private Port", "Type", “Public
	Port” and "Comment" of the setting to be added and then
	click "Add". Then this Virtual Server setting will be added
	into the "Current Virtual Server Table" below. If you find
	any typo before adding it and want to retype again, just
	click "Clear" and the fields will be cleared.
Remove Virtual Server	If you want to remove some Virtual Server settings from
	the " Current Virtual Server Table", select the Virtual
	Server settings you want to remove in the table and then
	click "Delete Selected". If you want remove all Virtual
	Server settings from the table, just click "Delete All" button.
	Click "Reset" will clear your current selections.

Click <Apply> at the bottom of the screen to save the above configurations. You can now configure other advance sections or start using the router (with the advance settings in place)

65