Topcom WBR 7101GMR manual Parameters Default Description Mode, Band

AP Bridge-WDS mode setting page

Parameters	Default	Description
Mode		It allows you to set the AP to AP, Bridge or WDS
		mode.
Band		It allows you to set the AP fix at 802.11b or
		802.11g mode. You also can select B+G mode
		to allow the AP select 802.11b and 802.11g
		connection automatically.
ESSID	default	This is the name of the wireless LAN. All the
		devices in the same wireless LAN should have
		the same ESSID.
Channel Number	11	The channel used by the wireless LAN. All
		devices in the same wireless LAN should
		use the same channel.
MAC address		If you want to bridge more than one networks
		together with wireless LAN, you have to set this
		access point to “AP Bridge-Point to Point mode”,
		“AP Bridge-Point to Multi-Point mode” or “AP
		Bridge-WDS mode”. You have to enter the MAC
		addresses of other access points that join the
		bridging work.

45