Display Screens
Screen Arrangement
The display screens are organized into three groups that can be cyclically selectable by pressing the SELECT key. The groups are:
Screen Arrangement Groups
1 | System Overview Screens | Provides operational status summary |
2 | Data Display Screens | Provides detailed UPS data monitoring |
3 | Data Settings Screens | Provides system configuration |
System Overview Screens
The System Overview screens provide a summary of the current operational state of the UPS. Only one of the several possible overview screens is available at any moment. The current screen is automatically determined based upon the UPS state.
UPS Start-Up Screens Sequence
The
If the correct AC input power is available and no abnormal operating conditions are present then the following system message will be displayed on the LCD screen.
toshiba 1600 ups
initializing...
Next, the LCD will report the current date and time. If necessary, the proper date and time can be set from the Data Settings screens (see pages 33 and 36 for details). The date and time appear using the format depicted in the following example:
05/09/2007 (WED)
15.:22:47
Next, the LCD will report the current UPS Operational Mode and the current percentage of the maximum UPS capacity being supplied. Initially, the UPS is in bypass mode, and the following screen will appear:
bypass operation
load ###%
note: If input voltage is removed while UPS is in the
Bypass Mode the output stops.
1600EP Series Instruction Manual | 29 |