Toshiba 1600EP Series Standard Models 3.6kVA-RoHS 3.6kVA 6kVA 8kVA cont’d, Unit Capacity, 3.1 kW1

Standard Models: 3.6kVA-RoHS; 3.6kVA; 6kVA; 8kVA (cont’d)

Unit (Capacity)	3.6 kVA-RoHS		3.6 kVA (3.1 kW)1	6 kVA (5.1 kW)1		8 kVA (6.8 kW)1
	(3.1 kW)1
Environment
Operating Temperature			60 Hz			50 Hz
59 – 77 °F (15 – 25 °C)	32 – 104 °F (0 – 40 °C)				32 – 91 °F (0 – 33 °C)
recommended
Storage Temperature			-4 – 104 °F (-20 – 40 °C)
Installation Area	To be installed in a well ventilated area free of airborne dust,
	metal particles or flammable gas, allow at least 4 inches on all sides
Operating Humidity			30 – 90% non-condensing
Altitude			< 3300 ft. (1000 m) above sea level 2
Acoustical Noise	50 dB (A) maximum @ 1 meter from front panel
Heat Generation	1588 BTU/Hr		1588 BTU/Hr	2610 BTU/Hr		3482 BTU/Hr
Operation Diagnosis
Battery Check	Performed on start up, by schedule, on-demand (user configurable)
Input OV Protection			Standard
Battery Lifetime		UPS calculates battery replacement time
	based upon battery ambient temperature (LCD display, LED and beeps)
Internal Temperature	UPS gives indication of internal temperature, alarm when high temp
Event Data Storage		64 – Supply Mode, 32 – Backup, 16 – Faults
Applications
Switches			Generator compatibility
Bypass Switch
Bypass Disable	Static switch < ¼ cycle (50 Hz – 5 ms/60 Hz – 4.16 ms)
Automatic Retransfer	Factory or authorized service center selectable only
User Interface		Provided – Can be disabled from front panel
Real Time Clock
Schedule Operation	Standard – Minimum 3 days memory backup during power loss
RUN/STOP Disable	Schedule ON/OFF operation of UPS using communication software
Autostart	UPS has option for UPS to start automatically when AC is applied
Remote ON/OFF			Standard – External terminal
LED Display	4 LED’s indicating input/output condition, warning and battery operation
LCD Screen			16 characters x 2 lines
UPS Operation: 6 Keys	Run/Stop, Set/Monitor, Shift/Select, Del/Page Down, Reset/Page Up
Buzzer Volume		Selectable by keypad – Low, High, Mute
Power Connections			Standard – Hard wire
Emergency Power Off			Standard – Terminal contacts only
Remote Contacts		Standard (INV, BYP, BATT, LB, AC, FLT)
RS232 ASCII Interface			Standard

1.Input/output figures rated for 240 volts. Output ratings given for 0.85PF are only valid when the input voltage is greater than 204 volts; otherwise, ratings given for 0.70PF are applicable.

2.At 6600 ft (2000 m) above sea level, output capacity should be derated by 3%

16 1600EP Series Instruction Manual