Toshiba 4511, 3511 manual 277, Remove the empty staple case and replace it with a new one

4 Remove the empty staple case and replace it with a new one.

- Replace both staple cases with new ones.

5 Return the saddle staple to its original position.

- Pull the handle of the saddle stitch holder (1) toward you and turn it (2) 90º in the direction of the arrow.

(2)

(1)

6 Return the saddle stitch unit to its original position.

7 Makeset. sure that A3, A4-R or B4 paper is

- If any of the above paper sizes is not set, test stapling cannot be performed.

8 Close the front cover of the finisher. Then, test stapling is automatically performed on a blank sheet.

- This is performed to avoid empty stitching.

12

If there is a test stapling failure and “Check staple cartridge” remains, repeat the above procedure from step 1 to 8.

277