Toshiba 3511, 4511 manual Turning on the Power Switch, Turning on/off the Power

	2. TURNING ON THE POWER SWITCH
	Turning on/off the Power
1	Turning on the Power Switch
	1	Open the switch cover, and then turn ON
		the power switch.
		- “Wait Warming Up” appears on the Basic screen on the touch
		panel.
	2	About 40 seconds later, the equipment
		will be ready.
		- “READY” appears on the Basic screen.
		- While the copier is warming up, you can use the Auto Job Start
		function. "4.AUTO JOB START (JOB PRESET)" Page 55
		- “POWER FAILURE” message:
		When restarting the equipment due to the power failure, etc.,
		“POWER FAILURE” appears at the upper right of the screen. To
		clear it, press the [FUNCTION CLEAR] button twice.
		The job in progress at the time of the power failure is deleted.

Turning off the Power (Shutting down)

When turning off the power of the equipment, perform the following shutdown procedure.

DO NOT turn off the power by switching off the power switch of the equipment as it can cause the failure of the hard disc.

Before turning off the power, be sure that the following 3 conditions are satisfied. - No jobs are left in the printing job list. See "1.JOB STATUS" Page 186.

-Make sure that none of PRINT DATA, MEMORY RX and FAX communication lamps is blinking.

-No PCs access the equipment via network.

1Press the [USER FUNCTIONS] button on the control panel.

30 1.BEFORE USING EQUIPMENT