Toshiba 4511, 3511 manual 133

8 Place the originals of the 2nd job.

9 On the Basic screen, set the settings for the 2nd job.

- The settings for the 2nd job or later can be changed with regard to the following functions.

Reproduction ratio, automatic magnification selection, original size, other size

Scanning mode

Image adjustment mode Edge erase, dual-page

- When the 1st job is set and 2-sided copying (or 1-sided copying) is selected, the setting cannot be changed to 1-sided copying (or

2-sided copying) from the 2nd job.

5

-Press the [SETTING] button to confirm the settings.

-To change the settings, press the [FC] button, and then start the procedure again from step 1.

-Be aware that copying will be performed in the same modes as those of the 1st job if the copy modes are not changed.

10After having completed the settings, press the [START] button.

-Scanning the originals starts.

-For the 3rd job or later, repeat from step 7 to 10.

-Any number of jobs can be set until the total number of scanned original pages reaches 1000.

11 After having completed all the settings and scanning of the originals, press the [JOB FINISH] button on the Basic screen.

- When copy and e-file/file function are set, storing starts.

133