Toshiba 4540c with GA-1211-EX ‰ Security, Setting up Odca Off Device Customization Architecture

1 RESTRICTIONS

Setting up ODCA (Off Device Customization Architecture)

Setting up Network

The following provided for Network cannot be changed when the controller is connected to the equipment:

yPort Number — The default port number “49629” is always used. This port number cannot be changed.

ySSL Port Number — The default SSL port number “49630” is always used. This port number cannot be changed.

e-STUDIO4540C Series/e-STUDIO6550C Series	e-STUDIO machine with the controller or
	e-STUDIO4540C Pro Series/e-STUDIO6550C Pro Series

For details on the ODCA screen, refer to the TopAccess Guide.

‰Security page

Authentication menu

Setting up Department Setting

The following provided for Department Setting differs depending on the equipment with or without the controller:

yInvalid Department Code Print Job — The option “Store to invalid job list” cannot be selected when the controller is connected to the equipment. You can select either “Print” or “Delete”.

e-STUDIO4540C Series/e-STUDIO6550C Series	e-STUDIO machine with the controller or
	e-STUDIO4540C Pro Series/e-STUDIO6550C Pro Series

24 TopAccess ADMIN Mode