Toshiba AD268 - page 29

User’s Manual 27

PART 1 AD268 6. Parameters

Averaging times:

(H8010 to H8017)

This parameter is for the averaging processing for the analog input data. The moving average

is calculated by the given averaging times parameter.

For example, if the averaging times parameter is 10, the average value of latest 10 times

conversion is output as the A/D conversion data.

This function is effective to reduce the fluctuation caused by noise.

The available setting range is as follows.

Input type A v eraging times

Upper limit 127

Default value 1All types Lower lim it 1

Input type setting:

(H8018 to H801F)

This parameter is used to select the input type. This parameter also has a function to skip the

A/D conversion for unused channels. By using the channel skip function, the conversion cycle

time can be reduced.

The available setting range is as follows.

Input type Setting v alue

0 to 5V 0 to 20 mA 0

0 to 10V - 1

1 to 5V 4 to 20 mA 2

±5V -4

±10V -5

Channel skip 128

The default setting value (factory setting) is 5 (±10V).

CTi Automation - Phone: 800.894.0412 - Fax: 208.368.0415 - Web: www.ctiautomation.net - Email: info@ctiautomation.net

Contents

Main Important Information Safety Precautions Safety Symbols ! ! Safety Precautions 2 About This Manual About This Manual Related Manual Table of Contents Part 1 8 Channel Analog Input Module AD268 4 Part 2 4 Channel Analog Output Module DA264 Part 3 8 Channel Thermocouple Input Module TC218 Page Page 8 1. Introduction 1.1 AD268 Functions Page 10 2. Specifications Users Manual 11 12 3. Input Type Setting 3. Input Type Setting 3.1 Jumper plug setting 1 3 3.2 Parameter setting by software 14 4. Wiring AD268 terminal block Users Manual 15 Voltage input External 24Vdc power supply Current input 16 4. Wiring Page 18 5.2 A/D conversion data Users Manual 19 5V range: 0 D = 3200 A 20 0 to 10V range: D = 3200 A Page 22 1 to 5V / 4 to 20mA range: 4 to 20mA range: D = 800 A - 3200 1 to 5V range: D = 3200 A - 3200 Page 24 6. Parameters The contents of the AD268's buffer memory are as follows. Users Manual 25 26 Page 28 Page 30 6.2 Parameter setting procedure 6.3 Sample program for se tting the parameters 32 7. Troubleshooting Users Manual 33 Page Page 36 1. Introduction 1.1 DA264 Functions Page 38 2. Specifications Users Manual 39 40 3. Output Type Setting 3. Output Type Setting 3.1 Parameter setting by software Users Manual 41 DA264 terminal block 42 4. Wiring External 24Vdc power supply Voltage output Current output Page 44 5.2 D/A conversion data 46 5V range: Users Manual 47 0 to 10V range: 48 0 to 5V / 0 to 20mA range: 0 to 20mA range: A = 1.25 D 0 to 5V range: Users Manual 49 1 to 5V / 4 to 20mA range: 4 to 20mA range: A = 1.25 D + 4000 1 to 5V range: A = 0.3125 D + 1000 50 Page 52 6. Parameters Page 54 6. Parameters 6.2 Sample program to access the parameters 56 7. Troubleshooting Page Page Page 60 1. Introduction 1.1 TC218 Functions Page 62 2. Specifications Users Manual 63 64 3. Input Type Setting 3. Input Type Setting 3.1 Jumper plug setting 1 3 3.2 Parameter setting by software 66 4. Wiring TC218 terminal block Users Manual 67 100mV input (CH1 to CH8) Thermocouple input CH1 CH2 to CH8 Connect the thermistor attached to the TC218 68 4. Wiring Page 70 5.2 A/D conversion data Users Manual 71 Thermocouple (type K) input: 72 Thermocouple (type J) input: Users Manual 73 Thermocouple (type E) input: 74 Users Manual 75 The contents of the TC218's buffer memory are as follows. 76 Page 78 Page 80 6.2 Parameter setting procedure 82 6.3 Sample program for se tting the parameters Page 84 7. Troubleshooting