ICC

•Follow all warnings and precautions and do not exceed equipment ratings.

•The ASD maintains a residual charge for a while after turning supply power off. After turning supply power off, wait at least ten minutes before servicing the ASD or interface board. Ensure that the Charge LED is off prior to beginning installation.

•For further ASD-specific precaution, safety and installation information, please refer to the applicable Adjustable Speed Drive Operation Manual supplied with your ASD.

3.2Maintenance Precautions

•Use lockout/tagout procedures on the branch circuit disconnect before servicing the ASD or installed interface board.

•The ASD maintains a residual charge for a while after turning supply power off. After turning supply power off, wait at least ten minutes before servicing the ASD or interface board. Ensure that the Charge LED is off prior to beginning maintenance.

•Do Not attempt to disassemble, modify, or repair the interface board. Contact your ICC or Toshiba sales representative for repair or service information.

•Turn the power on only after attaching the front cover and Do Not remove the front cover of the ASD when the power is on.

•If the ASD should emit smoke or an unusual odor or sound, turn the power off immediately.

•The ASD heat sink and discharge resistors may become extremely hot to the touch. Allow the unit to cool before coming into contact or performing service on the ASD or interface board.

•The system should be inspected periodically for damaged or improperly functioning parts, cleanliness, and to determine that all connectors are tightened securely.

10