ICC

3)Add a MSG instruction to the program.

a)If not already visible, double-click “LAD2” under Project…Program Files in the controller organizer view to bring up the ladder logic program.

b)Right click on the default rung number on the left-hand side of the LAD2 window and select “Insert Rung”.

c)Right click on the rung number of the new editable rung and select “Append Instruction”.

d)Select the “MSG” instruction from the “Input/Output” classification, then click OK. Refer to Figure 110.

Figure 110: MSG Instruction Selection

4)Add an XIO element to the program.

a)Right click on the rung number of the rung currently being edited and select “Append Instruction” again.

b)Select the “XIO” instruction from the “Bit” classification, then click OK. Refer to Figure 111.

97