ICC

6. LED Indicators

6.1 Front Panel

The interface board has 5 bicolor (red/green) LEDs that are visible through the ASD’s front cover (labeled 2.1 through 2.5).

Interface Status

2.1

EIP Module Status /

 

2.2

Reserved

 

EIP Network Status /

2.3

PROFINET Cnxn Status

 

Ethernet Activity

2.4

 

 

Heartbeat

2.5

 

 

Interface Status: Normally solid green during operation. If a fatal error occurs, this LED will flash a red error code. The number of sequential blinks (followed by 3s of OFF time) indicates the error code.

EIP Module Status / Reserved:

When the multi-protocol firmware image (with EtherNet/IP support) is loaded, this LED conforms to the prescribed “module status LED” behavior as dictated in the EtherNet/IP specification, Volume 2, Chapter 9. When the PROFINET IO firmware image is loaded, this LED is reserved, and therefore always OFF.

17