ICC
be used to actually control the drive via the option board: all other drive command parameters can only be monitored via the option board.
Monitor Parameters: Drive monitor parameters are available.
10.4.3 Parameter Subgroup Selection List
Subgroups can be used to further filter the parameters of a group that are to be displayed in the Parameter List. Refer to Figure 12.
If the group currently selected in the Parameter Group Selection List (refer to section 10.4.2) has subgroups available, then choosing one or more desired subgroups will further filter the parameters
that are displayed in the Parameter List. If the
10.4.4 Parameter List
The bottom half of the Monitor tab contains the parameter list (refer to Figure 13). The parameters that are displayed in the list at any given time depend on the groups/subgroups selected, as well as whether or not any filters have been applied (refer to section 10.4.5).
Figure 13: Parameter List
The first two columns of the Parameter List show the parameter name and the register number that provides access to that parameter, and were discussed in detail in section 9. The third column contains the parameter descriptions, which are used by the filter function. The last column performs two functions: it displays the current
27