
ICC
2. Features
Ethernet Port
IEEE 802.3 10/100BaseT Ethernet compliant. Shielded RJ45 connector accepts standard
Supported Protocols
The interface currently provides server support for the following fieldbus protocols:
•Modbus TCP
•EtherNet/IP
•Allen Bradley CSP (also known as “PCCC” and “AB Ethernet”)
•BACnet/IP
•PROFINET IO
Note that use of PROFINET IO is mutually exclusive of the other supported protocols. In order to use PROFINET IO, a separate application firmware file must be loaded into the interface (refer to section 12).
Adobe®
Interface configuration and
XML Configuration File Upload/Download
All interface configuration files are stored in the unit’s internal filesystem in XML format. These files can be transferred to/from a PC via the FTP protocol, which provides the capability for
Up to 20 configurable alarm conditions can be programmed into the interface. Value, logical comparison and
Dashboard GUI
A dashboard tab on the embedded web server provides 10 gauge windows, each of which can be configured to display any available drive register in a variety of meter, graph and gauge formats. Refer to section 10.11.
7