ICC

SMTP Authentication: Some email servers require that clients wishing to send emails first authenticate themselves. If the email server in use requires authentication, then enter the user name and password as indicated in Figure 41. If the email server in use does not require authentication, then these entries can be disregarded.

Figure 41: SMTP AUTH

Configuration

When a test email transmission is initiated,

completes successfully, or fails due to an error, the information window (refer to section 10.9.1) will display appropriate messages such as those shown in Figure 42 and Figure 43.

Figure 42: Information Window at

Figure 43:

Information Window at

Test Email Initiation

Test Email

Successful Completion

Although the test email is sent immediately, note that due to internet and/or email server delays, it may take several minutes to receive test emails.

10.9.3 Alarm Configuration

The interface supports twenty independently-configurable alarms. As shown in Figure 44, each alarm has a variety of configuration elements, which will be explained further below.

Figure 44: Alarm Configuration Box

45