Toshiba ASD-G9ETH 10.6.2 Device Identifiers, 10.6.3 Submitting Changes

Figure 23: BACnet Device Identifiers

ICC

10.6.2 Device Identifiers

A BACnet device’s name and ID (the Object_Name and Object_Identifier properties, respectively, of the Device Object) must be unique across the entire BACnet network because they are used to uniquely identify BACnet devices. The text entry boxes shown in Figure 23 are used to

configure these unique device identifiers on every drive.

10.6.3 Submitting Changes

Whenever either of the BACnet configuration elements (Device Name or Device ID) has been changed, the “submit” button located in the left-hand portion of the web page must be clicked in order to write these settings to the interface card’s filesystem.

Note that because these configuration elements are read from the filesystem only when the interface card boots up, the act of submitting configuration changes will also reset the interface card. Please allow 30 seconds for the interface card to reboot, at which time it will

then be operating with the recently- Figure 24: Submit BACnet Changes submitted configuration. Refer to

Figure 24.

34