ICC

EIP Network Status / PROFINET IO Connection Status: When the multi-protocol firmware image (with EtherNet/IP support) is loaded, this LED conforms to the prescribed “network status LED” behavior as dictated in the EtherNet/IP specification, Volume 2, Chapter 9. When the PROFINET IO firmware image is loaded, this LED is on solid green when the controller has established a link with the interface board and is communicating with it.

Ethernet Activity: Blinks green briefly when network packets are sent or received.

Heartbeat: Blinks green to indicate communication between the interface card and the drive. Contact ICC technical support if a blinking red error code is observed.

6.2 Ethernet Jack

The Ethernet jack also contains two embedded LEDs.

Reserved

Ethernet Link

Ethernet Link: This amber LED is lit whenever a viable Ethernet network is connected to the port.

Reserved: This green LED is currently unused and is therefore always OFF.

18