Plug & Auto Setup

4 Start the auto scanning.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The DVD Recorder-VCR will automatically set itself up when it is plugged into the mains for the first time.

TV stations will be stored in memory. The process takes a few minutes. The DVD Recorder-VCR will then be ready for use.

1

Connect the RF cable as indicated on page 19.

5

Wait current time and date are displayed

 

• Connecting Your DVD Recorder-VCR to the TV

automatically.

 

 

using the RF Cable.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Plug the DVD Recorder-VCR into the mains.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• “Auto” in the front panel display flickers.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

System Setup

 

 

 

Check the date and time.

 

6

 

• if it is: Correct

3

Start the auto setup.

Press OK button then the data and time

will be saved.

 

 

 

 

• if it is: Incorrect

Refer to “Seting the Date and Time” menu, when you want to change the date and time.

English - 27

Page 27
Image 27
Toshiba D-VR3SB owner manual Plug & Auto Setup