Toshiba D-VR3SB owner manual Setting the VCR Output Channel, Select VCR Output CH

5	Press the ❷ buttons, until the required preset	3	Select “Install”
	TV programme is selected then press ❿ or OK		Using the ❷ buttons, move the selection bar
	button to select.		to “Install”, then press OK to select.

Edit
Delete	Programme
Swap

6	Press the	or❷ button to select Swap.
	To change the programme number assigned to a
	station press the OK button on the remote con-
	trol.
	• For example, to move a TV station in pro-
	gramme 1 to programme 3).
7	Press the	❷ buttons to select required posi-
	tion. And then press OK button again to swap the
	position.
8	On completion, press the RETURN button four
	times to exit the menu.

Setting the VCR Output Channel

1 Open “MENU”

With the DVD in Stop press the MENU button.

2 Select “Setup”

Using the ❷ buttons, move the selection bar to “Setup” then press OK to select.

4	Select “VCR Output CH”
	Move the selection bar to “VCR Output CH”
	using the ❷ buttons then press OK to select.
			Install
		Auto Setup
			Ch 56
		Manual Setup	Ch 57
		VCR Output CH	Ch 58
	Programme		Ch 59
			Ch 60
			Ch 61
			Ch 62

5		Select the required output channel (Ch21~Ch69)
		by pressing the or❷ button then press OK to
		Select.
			ÆCh21 Æ ..Ch38 Æ ..Ch69
	6	On completion, press RETURN button four times
		to exit the menu. Then tune your television again

System Setup

English - 33