Toshiba D-VR3SB owner manual AV 1 Output, Press Or ❷ , until

NICAM

NICAM programmes are divided into 3 types.

NICAM Stereo, NICAM Mono and Bilingual (transmis- sion in another language).

NICAM programmes are always accompanied by a standard mono sound broadcast and you can select the desired sound.

	1	Open “MENU”
		With the VCR in play mode, Press the MENU
Setup		button.
	2	Select “Setup”
ystemS		Using the ❷ buttons, move the selection bar
		to “Setup” then press ❿ or OK button to select.
	3	Select “System”
		Using the ❷ buttons, move the selection bar

to “System” then press ❿ or OK button to select.

Programme

5	To...	Press	or ❷ , until...
	Mono mode	Off is displayed.
		Off: Only set at this position to
		record the standard mono
		sound during a NICAM broad-
		cast if the stereo sound is dis-
		torted due to inferior reception
		conditions.
	NICAM mode	On is displayed.
		On: Normally set at this position.
6	On completion, press RETURN three times to
	exit the menu.

AV 1 Output

Front Display : Automatic

NICAM: On

P rogramme AV1 Output Video

RGB

						• RGB : Sends RGB signal from the AV JACK
						(SCART terminal)
4	Select “NICAM”					• Video : Sends COMPOSITE VIDEO signal from
	Using the ❷ buttons, move the selection bar					the AV JACK (SCART terminal).
	to “NICAM” then press				❿ or OK button until
	NICAM option is selected.
				VCR
				Front Display	: Automatic
				NICAM	OFF
		P	rogramme	AV1 Output	On

46 - English