Toshiba D-VR3SB owner manual Recording the current Programme you are watching, Pausing / Resuming

Recording the current Programme you are watching

DVD-RAM DVD-RW DVD-R

Pausing / Resuming

•Press the REC PAUSE button to pause a recording in progress.

•Press the REC PAUSE button again during pause to resume recording.

•You can switch stations by pressing the PROG/TRK

/ buttons while recording pauses.

Recording

1.Check the aerial cable is connected.

2.Check the remaining time of disc.

DVD-RAM/DVD-RW discs should be formatted in advance before beginning recording. Most new discs are sold unformatted. Make sure to format your unformatted discs before recording.

3. Corresponding station should be preset.

1	Press the OPEN/CLOSE button and place a
	recordable disc on the disc tray.

Press the OPEN/CLOSE button to close the disc

2 tray.

3	• Press the PROG/TRK / buttons to select
	the station you want to record.

•The AV1, AV2 or AUX using the INPUT SEL. button for a satellite tuner or exteral Video source.

4	Press the REC SPEED button on remote control,
	to select the recording speed (quality).
	• XP(High, approx. 1 hour) ÆSP(Standard,
	approx. 2 hours) ÆLP(Low, approx. 4 hours)
	ÆEP(Extended Play, approx 6 hours)
5	Press the z (REC) button.
6	Press the (STOP) button to stop or finish a
	recording in progress.

• The message “Updating the information of disc. Please wait for a moment”.

Note

„ You can’t change the recording speed and programme during recording.

„Recording will stop automatically if there is not enough space for recording.

„Up to 99 titles can be recorded onto a disc.

„If the power interrupted due to power failure or other reasons, the title being recorded will not be saved onto the disc.

„Recording will stop automatically if a copy pro- tected image is input.

„Do not use DVD-R authoring discs with this unit.

70 - English