Toshiba D-VR3SB Method 1 Connecting to a video input jack, AV2 in By means of 21-pin Scart Cable

	1. AV2 IN: By means of 21-pin Scart Cable
	Plug the SCART Cable with satellite receiver or
	other equipment into the AV2 (DEC./EXT.) socket
	on the rear of the DVD Recorder-VCR.
	After making this connection, select the source by
	pressing the INPUT SEL. button for the AV2 input
	sources.
	2. By means of RF Cable
	After making this connection, you must preset the
	station received through the satellite tuner.
	RF output channel of the satellite receiver should
	be adjusted away from channel 60, which is used
onnectionsC	by the DVD Recorder-VCR, e.g. re-adjust to channel
	65.
	Satellite Receiver or other
	Equipment
	Aerial Connector

AUDIO OUT

Step 4: Connecting the Video Cable

There are several ways to connect your DVD Recorder- VCR. Select one of the following video connecting meth- ods that best suits you below.

•Method 1 : Connecting to a Video input jack

•Method 2 : Connecting to an S-video input jack

S-Video Modes

•S-Video is available only if your TV supports S-Video input. If S-Video output does not work, check the TV connections and the TV input selection settings.

Method 1 : Connecting to a video input jack

1

SCART

Cable

TV

ANT

2

Connect a video(yellow) cable between the VIDEO (yel- low) OUT jack on DVD Recorder-VCR and VIDEO(yel- low) IN jack on the TV(or AV amplifier).

•You will enjoy regular quality images.

•Connect audio cables (white and red) between the ANALOG AUDIO OUT jack on the DVD Recorder-VCR and AUDIO IN jack on TV (or AV amplifier).

AUDIO OUT

RF cable

R

L

VIDEO

INPUT

L

AUDIO

R

20 - English