English - 49
Playback
Press OPEN/CLOSE button to close the disc
tray.
• Your DVD Recorder-VCR closes the disc tray
and plays the disc automatically.
• When a recordable media (DVD-RAM, DVD-
RW, DVD-R, etc.) is used, Auto Playback can-
not be activated without pressing the Play but-
ton. When pressing the ON/STANDBYbutton
while a disc is in the tray, the unit will be activat-
ed. Press PLAYto start playback.
• If you insert MP3 Disc, your DVD Recorder-
VCR will display the file list on the screen and
start.
• When a JPEG disc is inserted, folders and a file
list are displayed in the Album format.
3
Press the STOP button to stop playback.
4
When you stop disc play, the recorder
remembers where you stopped, so when you
press PLAYbutton again, it will pick up where
you left off. (unless the disc is removed or the
recorder is unplugged, or if you press the
STOP button twice.) This function is only
applicable to DVD-Video, DVD-RAM/ DVD-
RW/DVD-R or Audio CDs (CDDA).
Note
Do not move your DVD Recorder-VCR while
playing, as this may cause damage to the
disc.
Make sure to press the OPEN/CLOSE button
to open or close the disc tray.
Do not push the disc tray while it is being
opened or closed, as this may cause a prod-
uct malfunction.
Do not place foreign materials on or in the
disc tray.
Some functions may perform differently or be
disabled depending on the disc type. If this
occurs, refer to the instructions written on the
disc case.
Be especially careful that children's fingers are
not caught between the disc tray and the tray
chassis when it closes.
After turning power on, it will take a few
seconds until the DVD operates.
CAUTION
Press the OPEN/CLOSE button.
1
Place a disc gently into the tray with the disc’s
label facing up.
2