Toshiba D-VR5SU owner manual Setting the disc / Other System Setup, Protect Disc, Undo Finalize

Setting the disc / Other (SYSTEM SETUP)

NOTES:

¥During finalizing, the cursor will move repeatedly. When the finalization finished, ÒFINALISING COM- PLETED PRESS ENTERÓ will appear. Press ENTER to clear the screen.

¥The finalization process may require a few minutes to about 1 hour according to disc type or the amount of free space on the disc.

¥You can record or edit a finalized DVD-RW (in VR mode) by cancelling the finalizing, but you cannot do these operations with a DVD-RW (Video mode), or with a DVD-R.

¥You cannot playback a disc recorded on VR mode on a unit that does not support DVD-RW.

¥Even if you finalize a disc in the Video mode, the disc cannot be played back in some DVD players.

¥A DVD-R disc cannot be named after it is finalized.

PROTECT DISC

You can protect a disc to prevent the content recorded on it from being erased, edited or re-recorded.

Only DVD-RAM and DVD-RW (in VR mode) can be protected.

Select ÒPROTECT DISCÓ and select ÒONÓ to protect the disc.

To cancel the disc protection, select ÒOFFÓ.

UNDO FINALIZE

You can cancel the finalization of a finalized DVD-RW (in VR mode).

You cannot cancel the finalization for discs other than above. You can record or edit on a disc whose finaliza- tion has been canceled.

Select ÒUNDO FINALIZEÓ, and the screen below will appear.

UNDO FINALIZE

START CANCEL

¥When you select ÒSTARTÓ and press ENTER, the cancelling finalization will start. The screen below will appear.

UNFINALIZING

PLEASE WAIT

¥When you select ÒCANCELÓ and press ENTER, the DISC SETUP screen will appear.

NOTES:
¥	During unfinalizing, the cursor will move repeatedly.
	When cancelling finalization is complete, ÒUNDO
	FINALISING COMPLETED PRESS ENTERÓ will ap-
	pear. Press ENTER to clear the screen.
¥	The cancelling finalization process may require a few
	minutes to about 1 hour according to disc type or the
	amount of free space on the disc.
¥	When the discÕs finalization cannot be canceled, you	Various
	cannot select ÒUNDO FINALIZEÓ.
DVD-RAM Physical Format		settings
Physically formats a DVD-RAM disc. Whenever you use

a new disc for the first time, be sure to format it.

NOTE:

The physical format process may require about 1 hour according to disc condition.

This section describes the other setting in SYSTEM SETUP

Preparation:

¥Turn ON the TV and set it to the video input mode.

¥Select ÒOTHERÓ from ÒSYSTEM SETUPÓ. For the pro- cedure, see steps 1 to 3 in ÒUsing the SETUP MENUÓ on page 24.

SETUP MENU

TIMER REC SET		LANGUAGEOTHER
SYSTEM SETUP		PARENTAL	AUTOMATIC
	DIMMER
AV SETUP	DISPLAY/CALLCLOCK		ON
REC SETUP		DISC SETUP
CH SETUP		OTHER
OTHER

DIMMER (Brightness of the display window)

You may adjust the brightness or turn off the display on the front panel of the unit. Select ÒDIMMERÓ and select the display window status from the below.

AUTOMATIC: When the power is on, the display win- dow appears bright. When the power is off, it appears dark.

DIM:The window display always appears dark.

OFF: When the power is on, the display win- dow appears dark. When the power is off, it is turned off.

DISPLAY/CALL (Turning the screen dis- play “ON” or “OFF”)

You can turn off the screen display that is output to the TV screen by this unit. Select ÒDISPLAY/CALLÓ, and select ÒONÓ or ÒOFFÓ.

ON: The screen display appears.

OFF: Nothing but the SETUP MENU and error mes- sages appear.

29

2J40101A P23-33 29 3/4/06, 10:43 AM