Disc playback

Playback procedure

NOTES:

¥If a non-compatible disc is loaded, ÒIN-

CORRECT DISCÓ, ÒREGION CODE ERRORÓ or ÒPARENTAL ERRORÓ will appear on the TV screen according to the type of loaded disc.In this case, check your disc again (See pages 9 and 26).

¥Some discs may take a minute or so to start playback.

¥A prohibition symbol ÒÓ may appear at the upper right of the screen. This symbol means either the feature you tried is not available on the disc, or the DVD/VCR can not access the feature at this time. This does not indicate a problem with the DVD/VCR.

¥When you set a single-faced disc la- bel downwards (ie. the wrong way up) and press PLAY or OPEN/CLOSE, ÒREADINGÓ will appear and then it will change to ÒNO DISCÓ.

¥Some playback operations of DVDs may be intentionally fixed by software producers. Since this DVD/VCR plays DVDs according to the disc contents the software producers designed, some playback features may not be available. Also refer to the instructions supplied with the DVDs.

¥When playing DTS-encoded Audio CDs, excessive noise will be heard from the analog stereo outputs. To avoid possible damage to the audio system, the consumer should take proper precautions when the analog stereo outputs of the DVD/VCR are connected to an amplification system.

Preparation:

¥Turn ON the TV and set to the video input mode.

¥Press DVD to select the DVD mode. (The DVD indicator will light.) NOTE: It is impossible to switch to the VCR mode while DVD is

played back.

1 Press OPEN/CLOSE.

The disc tray will open.

2Place a disc onto the tray.

Hold the disc, position it with the

printed label side up, align it with the guide and place it in its proper position.

3Press OPEN/CLOSE to close the disc tray.

ÒREADINGÓ appears on the screen

and some discs start playback au-

READING

tomatically.

 

¥A menu screen may appear on the TV screen if the disc has a menu feature. In this case, press

, , , or ENTER to operate a menu feature.

4Press PLAY to start playback.

5Press STOP to end playback.

¥The DVD/VCR memorizes the stopped point, depending on the disc. Ò Ó appears on the screen for approx. 4 seconds.

Ò Ó keeps blinking in the display window until the playback is stopped completely. Press PLAY to resume playback (from the scene point).

¥If you press STOP again (Ò Ó appears on the screen), the DVD/ VCR will clear the stopped point.

6Then press OPEN/CLOSE. The disc tray opens.

Remove the disc and press ON/STANDBY.

The disc tray closes automatically and DVD/VCR turns off.

34

2J40101A P34-40

34

3/4/06, 10:44 AM

Page 34
Image 34
Toshiba D-VR5SU owner manual Playback procedure, Disc playback, Press OPEN/CLOSE