Toshiba RAV-SP1104AT8-TR, RAV-SP1104AT8ZG-TR 127, 10Compressor 1. Removal of defective compressor

No. Part name Procedure Remarks

10Compressor 1. Removal of defective compressor

Compressor	1)	Recover the refrigerant gas.	Piping panel (Front)
lead	2)	Carry out work of item 1 of Q, 1 of S and 1 of W.
	3)	Remove the piping panel (Front).
		Remove the piping panel (Front) and screws of the
		bottom plate. (Hexagonal screw Ø4 × 10, 2 pcs.)
		Remove screw of the piping panel (Front) and the	Piping panel (Rear)
		piping panel (Rear). (Hexagonal screw Ø4 × 10, 1 pc.)

4) Remove the piping panel (Rear).

Remove the piping panel (Rear) and screws of the	Pipe cover
bottom plate. (Hexagonal screw Ø4 × 10, 2 pcs.)	Bundling band
5) Remove the sound-insulation plate.
	(For thermal proof)
(Upper, rolling in, rolling out)
6) Remove the terminal cover of the compressor and	TD sensor
then remove the compressor lead and the compressor
case thermo.

7)Remove TD sensor which is fixed to the discharge pipe.

8)Remove the compressor lead.

Control P.C. board U : CN211 Red
V : CN212 White
W : CN213 Black
9) Remove ferrite core from compressor lead.	Compressor lead

10)Using a burner, remove the discharge pipe and the suction pipe which are connected to the compressor.

WARNING

In case of removing the piping by broiling the welded part with a burner, if there is oil in the pipe, it may burst into flames at the moment that wax melted, so take sufficient care.

				Ferrite core
	CAUTION
Note so that the flame does not catch the
4-way valve and PMV. (A malfunction may be caused.)
			Remove
			(Discharge pipe)
11) Pull off the discharge pipe and the suction pipe of
the refrigerating cycle upward.
12) Remove the compressor nuts which fix the
compressor to the bottom plate. (3 pcs.)					Remove
13) Pull out the compressor toward you.					(Suction pipe)
	CAUTION
As weight of the compressor is 20kg or more, handle it
by 2 workers.			Compressor nuts
		450	(3 pcs.)

– 127 –