Toshiba RAV-SP1404AT8ZG-TR service manual Others Selection of LED display SW800, SW803 operation

9-3-3. Others

1.Selection of LED display (SW800, SW803 operation)

1)Display selection list

The displayed contents of LED D800 to D804 on the outdoor control P.C. board can be exchanged by operation of SW803.

						Switch										Function / Contents	Refer
							SW803									Error display (Error generating at present)	Refer to
																Error generating at present is displayed.	2)
						ON										This switch goes off when an error does not generate.
					1		2		3	4
																Error display (The latest error: Latest error including present)	Refer to
																After error status was cleared, the error which generated	2)
							SW803									before can be confirmed by this setting. (Reconfirmation is
																available even if power supply was turned off once.)
						ON
																• If an error generates at present, the same contents as those
																of error which is generating at present are displayed.
					1		2		3	4
																• Only error of TO sensor is not displayed by this setting.
																(Confirm it by setting of error which is generating at present.)
																Temperature sensor display	Refer to
		TD						TE					TS			The detected value of temperature sensor is displayed.	3)
	SW803						SW803					SW803
ON					ON						ON
1	2		3	4	1		2		3	4	1	2		3	4
		TO						TL					TH
	SW803						SW803					SW803
ON					ON						ON
1	2		3	4	1		2		3	4	1	2		3	4
			TA					TC					TCJ
	SW803						SW803					SW803
ON					ON						ON
1	2		3	4	1		2		3	4	1	2		3	4
							SW803									Current display	Refer to
																The current value which flows in the outdoor unit is displayed.	3)
					ON
					1		2		3	4
							SW803									Compressor operation frequency display	Refer to
																The operation frequency of the compressor is displayed.	3)
					ON
					1		2		3	4
							SW803									PMV opening display	Refer to
																The opening of PMV (Pulse Motor Valve) is displayed.	3)
					ON
					1		2		3	4
							SW803									Ps sensor display	Refer to
																Detected Ps sensor is displayed.	3)
					ON
					1		2		3	4

– 86 –