Step 2: Choose a Location for the A1500

To help guarantee trouble-free operation of your A1500, place it on a flat, stable surface. Leave enough space behind and in front of the A1500 to allow for easy paper loading, document removal, and for opening the control panel.

!

CAUTION: Do not place the A1500 in direct sunlight, near heat

sources or air conditioners or in dusty or dirty environments.

Step 3: Prepare the A1500 for Use

When you take the A1500 out of the box, note that it was packaged to protect it during shipping. Before you use the A1500, make certain that you remove all of the following items:

Tape

Packing materials

CAUTION: For instructions on removing the packing material, see the

!Compaq A1500 All-In-One setup poster.

Step 4: Set Up the Document Trays

The A1500 uses several trays to support your paper documents.

Document Exit Tray

To install the document exit tray:

1.Align the latches on the tray with the slots on the front of the All-In-One.

2.Slide the tray latches into the appropriate slots until the latches lock into place.

Installing the document exit tray

4

Extend the Document Trays

The A1500 ships with the document input/exit tray already installed.

To support documents before and after printing, faxing, copying or scanning, remove the packing tape and extend all of the trays by pulling up and unfolding the extensions.

The A1500 appears as illustrated:

Extending the paper trays

Page 8
Image 8
Compaq Choose a Location for the A1500, Prepare the A1500 for Use, Set Up the Document Trays, Document Exit Tray