J :
Date/Time:
Dialed Number:
1. CO Line
2. Internal
[DN]
Dialed Number
identification Service
(DNIS) Calls:
1. Press
Page to display date/time when talking on a Central Office (CO) line
(Soft Keys must be off before the call is started).
2. The date/time is adjusted on a system-wide basis by the station located in
port 00 (usually station 200).
3. Continued pressing of
Page toggles the display in succession among:
Date/Time, Number Dialed, and Elapsed Time of the present call.
The digits are displayed as you dial when connected to either a CO Line or the
[DN]
using:
n Manual dialing
n Automatic dialing
H Repeat Last Number Dialed
n Saved Number Redial
Note:
If you are calling on a CO line, the display automatically changes from
dialed number to elapsed time after a programmed period.
Incoming DNIS telephone numbers can be correlated in the system database
with assigned DNIS names. These names can have up to 16 alphanumeric
characters, and will display on your telephone’s LCD. This allows incoming calls
to be instantly identified and appropriately answered.
Note:
DNIS information cannot co-exist on the same telephone LCD with
Automatic Number Identification (ANI) information. (See ANI.) When an
ANUDNIS incoming call is ringing, press the
Page button to alternate
between ANI and DNIS displays when both types of information is
received on an incoming call.
To activate the DNIS display mode, press
Mode + 6 1. To deactivate the DNIS display mode, press
Mode + 6 0. For ACD calls.
12