Using Soft Keys to Make a Conference Call

1.While on an outside display the following

call with CO line (line 3 for this example) your LCD will prompts:

TALK ON LINE 3

TRNS CONF PGE

ModePageSCKJII

0II

Note:

Once the Soft Key prompts appear (in this case, the Soft Keys are

TRNS, CONF, and PGE for Transfer, Conference, and Page), the buttons below them now stand for Transfer, Conference, and Page instead of Mode, Page, and Scroll. In the following steps of this example, only the Soft Key displays will be shown since Mode, Page, and Scroll no longer apply while Soft Keys are active.

nIf you initiated the call, the “TRNS” prompt will appear 30 seconds after

the first digit of the telephone number is dialed-the “ABR” prompt for Automatic Busy Redial (ABR) will appear during this first 30 seconds (if it does not appear, then this feature was not assigned in system

programming). If the call is an incoming call, the “TRNS” prompt will appear immediately when you answer the call.

2.Press the CONF Soft Key to initiate the Conference.

TALK ON LINE 3

TRNS CONF PGE I

nThe outside call will be placed on hold and the LCD will appear as follows after you press the CONF Soft Key in Step 2.

32

Page 42
Image 42
Toshiba DK 280 manual Talk on Line Trns Conf PGE, Using Soft Keys to Make a Conference Call