8. The LCD will appear as follows after you press the JOIN Soft Key in Step 5
and all parties will be conferenced.
I LN3t203
EXIT CONF
H “LN 3 + 203” indicates that you are in a Conference with CO line 3 and
Station 203.
n You can exit the Conference and the other parties will remain connected
if you press the EXIT Soft Key.
H You can add another station or CO line by pressing the CONF Soft Key.
Note:
If the Soft Key feature is activated at your station, incoming call
information will not display on your LCD while your station is busy. To
display this information, you must either disconnect the existing call or
place it on hold.
Soft Key Prompt Definitions
The following list provides definitions of all of the Soft Key prompts that could
appear on your LCD.
TRNS-Press to initiate or complete a Transfer while on an outside call. TRNS
can cause an immediate or announced transfer, depending on how the feature is
set in system programming. After initializing transfer, pressing TRNS again will
complete the transfer.
CONF-Press to initiate or complete a conference.
PGE-Press to park an outside call and to gain access to a menu of page
options.
RING-Press to make a called station ring when making a voice announce call
to the station.
TALK-Press to make a voice announcement to a called station that is ringing.
MESG-Press to set a message waiting indication at a busy or unanswered
station.
OVRD-Press to gain access to override options or to override a station that is
busy or in the Do Not Disturb mode.
BUSY-(Busy Override) Press to send a call-waiting tone to a busy station.
35