.
.
.~.
:::
.
.
To Create an LCD Message
for Phones that Call Yours:
1. Press the LCD Msg
Select
- or -
press a
[PDN] +
# 6 8).
[iLiZ--] W>.‘>
2. Dial the number of the
message you want.
3. Press LCD Msg
Select
- or -
Spkr.
To Cancel a Message that
Has Been Set at Your
Station:
l Press LCD Msg
Select.
- or -
1. Press a
[PDN] + # 6 8.
2. Press Spkr.
Messaging Calling Station Messaging
You can set a message that will appear on the LCD of telephones that call your
telephone by following the instructions on the left.
The LCD Msg Select LED flashes, and the LCD displays “MSG NO.?”
Personal message (10 N 19) and system message (60 = 99). The selected
message is displayed. (To add to this message, use the procedure for
“Recording A Message,” found earlier in this chapter.)
The LCD Msg Select LED lights continuously, and the selected message will be
set. The message will be sent to LCD telephones that call your telephone. If you
have CF set on your telephone, press the Page button to display the message
instead of CF.
Canceling a Calling Station Message
The LCD Msg Select LED goes out.
The LED lights.
The LED goes out. A personal message (10 Y 19) will remain stored in memory.
42