Toshiba DK 280 manual Message Sending, Called Station Messaging

To Set a Called Station

Message:

1.Press MODE + 7 0 to ensure that Soft Keys are off.

2.Dial the station Directory Number (station does not answer or is busy).

3.Press Mode.

4.Press 4.

5.Enter the desired message number.

6.Press Msg.

7.Press Spkr or hang up to release.

Message Sending

The Alphanumeric Messaging feature on your LCD digital telephone enables you to set short text (up to 32 characters) at your station to ensure that you do not miss important calls. Any station may record a message; however, only stations with the LCD are able to display messages. Stations that do not use Soft Keys (Soft Keys Off: Mode + 7 0) may send messages “live” to other LCD station users. To record messages, see the Recording a Message section in this guide.

Your system has up to 40 preprogrammed messages that may be sent to other LCD digital or electronic telephones. In order to leave a personalized message at your station, you can temporarily add or change any of these messages.

Some stations may record and save up to 10 personal messages to be used for all types of station messaging. This is a station option that is enabled in system programming.

Called Station Messaging

Your station number and a message indication may be sent to another LCD station. When that station responds, it will receive the message. Soft Keys must be off (Mode + 7 0) at the sending station for this feature to operate.

The LCD displays “MODE?“.

The LCD displays “MW TO STNNN MSG NO?“.

Personal message (IO * 19), system message (60 = 99). The LCD displays the message.

“CALL XXX-YYYM” is displayed at the called station and the Msg LED flashes; “SENT MMM” is displayed at your station. XXX = the called [DN], YYY = the [PDN] of the station that sent the message, M indicates that a message has been sent.

49