2. Press Scroll to view
the saved information
on the LCD display.
n Press # to delete
information on the
LCD display.
n Press * to go back
to previous LCD
screen.
If your telephone is equipped with a Lost Call Auto Dial button, you may
auto dial a saved number by performing any of the following:
H Enter Class/AN1 Information display Mode + 6 2, and choose the number
or name of the lost caller you want to contact.
H Press Pooled Line Crp*, and then Lost Call Auto Dial.
H Press a
[DN]
button, enter the appropriate CO or LCR access code>, then
press Lost Call Auto Dial.
n Press the CO Line button”, and press Lost Call Auto Dial.
Note:
1. The ANI/Caller ID received telephone numbers always include area
codes on local calls as well as long distance calls. The DK280
system will always auto dial the digit “1” before the saved, outgoing
telephone number.
2. If your telephone requires an account code be entered before dialing
outside telephone numbers, enter the account code after access
LCR or a CO line, then press the Lost Call Auto Dial button.
3. Press Lost Call
Auto Dial.
Station-to-Station Message Waiting If there is no answer (or if the telephone is busy or DND), press the Msg button
(or 7). This causes the Msg LED on the called station to flash. The called
station’s LCD displays the calling station’s number. When the returned call is
answered, the flashing Msg LED will turn off
To Use Station-to-Station
Message Waiting:
1. Lift the handset or
press a
[DN]
to receive
internal dial tone.
2. Dial the desired station
number.
3. The calling station user
presses the Msg (or 7)
to set the Msg LED on _
the called station.
The
[DNs]
after
SENT
are the
[DNs]
which received your message waiting
indication signal, if you set a message waiting indication signal.
26