. . . . .
:::.
‘
To Check a Speed Dial Number:
1.Press Mode + 8 when telephone is idle.
2.Dial a
3.Press Page to scan the directory for the appropriate number/memo.
Note:
The station must be enabled via system programming for LCD message memory
Personal speed dial number (10 * 49) or system number (600 N 699).
If the number is longer than 16 digits, a ‘(+‘I will appear in the far right corner of the display. Press Scroll to display the remaining digits.
To Set a Timed Reminder with Memo:
1.Press a [DN].
2.Dial a
(# 6 0 5 - # 6 0 9).
3.Enter the desired time for the message to be displayed.
4.Dial 0 if the message is to be repeated every day, or 1 if it is a one- time message only.
5.Enter the desired message number, or 00 if no message should be stored.
6.Press Redial to record the data in memory.
Timed Reminders with Memo
This feature allows five separate messages to be set at each LCD station. These messages will be displayed at the times (hour and minute) set by the station user. They can either be displayed just once or repeated on a daily basis.
The message time must be in
Personal message (10 m 19) and system (60 m 99). The message does not display when setting a timed
The LCD displays “DATA PROGRAMMED”. You will hear a confirmation tone. The message will be displayed at the specified time, and a beeping tone will be heard for 30 seconds (or until it is canceled by pressing Mode + 0).
48
