To activate Soft Keys at your station:
1.Make sure your telephone is idle. Do not lift the handset.
2.Press the Mode key below the LCD.
3.Press 7 1.
EXEC-(Executive Override) Press to break into the conversation of a busy called station.
ACB-Press to activate Automatic Callback after reaching a busy station, CO line, or CO Line group.
ABR-Press to activate Automatic Busy Redial after dialing a busy outside telephone number.
RLS-Press to disconnect a call and to return to the idle state.
RTRN-Press to terminate a feature operation and to return to a previously displayed state.
LINE-Press to add a CO line to an existing call while in the Conference mode. The LCD will prompt you to access a CO line after you press this key.
STA.-Press to add a station to an existing call while in the Conference mode. The LCD will prompt you to dial a station number after you press this key.
JOIN-Press while on a conference call to join all parties to a conference.
EXIT-Press to exit from a conference and to leave the remaining parties connected.
Soft Key Activation
Your telephone must be idle before you follow the steps on the left to activate or deactivate the Soft Key feature at your station.
Soft Keys are now activated and the appropriate feature prompts will display when your phone is in use. The Soft Key feature will remain on until you turn it off. In short, you can perform numerous telephone functions and the Soft Keys will not be cancelled unless you deactivate them.
