Toshiba EO1-11099, EO1-11113, FS-1650, FS-1650-4 SERIES FOREIGN CURRENCY EXCHANGE RATE SETTING

– 70 –
EO1-11113
In this program, the rate of each foreign currencies (corresponding to the [CUR1] to [CUR5] keys) will
be set. By setting a rate on each Foreign Currency Key, reading the sale total and tendering in the
foreign currency value will be possible for sale finalization.
Any time outside a sale
Mode Lock: SET
| Exchange Rate for Foreign Currency 1 |
0.000001 to 9999.999999
(Use the [ . ] key if decimal portion is contained in the rate.)
| Exchange Rate for Foreign Currency 5 |
As for how to calculate the Exchange Rate, see the description below.
Foreign Currency Exchange Rate Calculation
1. The rate must be calculated in the subsidiary currency unit values for both the domestic and the
foreign currencies. (In calculating the rate from the domestic to a foreign currency with the same
zero-suppress form, such as from U.S. $ to French Franc. it will be no problem even if it is calculated
in the main currency of $ and Franc. However, in case of exchanging from a domestic currency
such as $ or Franc to Japanese yen or Italian Lira, or vice versa, this rule must be obeyed; otherwise
a wrong rate will result.)
FOREIGN CURRENCY EXCHANGE RATE SETTING
[CUR5]
[CUR1]
.
.
.
.
.
.
.
.
.
.
.
2. Calculate the required foreign currency value equivalent to the domestic currency value “1”. Then
the obtained value is the Exchange Rate value to be entered in the setting operation stated above.
For example, if the domestic currency is U.S. $:
1¢ = xxxx.xxxxxx centimes (French Franc)
= xxxx.xxxxxx pfennings (Deutsche Mark)
= xxxx.xxxxxx yen (Japaneses yen)
etc.
OPERATION
CONDITION
Enter this value as each foreign currency rate.