– 63 –
EO1-11113
GUEST CHECK PRINTER (hardware option) OPERATION
The TEC Guest Check Printer DRS-207 may be connected to the FS-1650 series ECR as an optional
device. The Guest Check Printer will operate printing if a slip is properly inserted, regardless of the Mode
Lock position (except that no print will occur in the "SET" mode or during program verification in the "X"
mode).
1. The guest check printer will automatically activate printing when the slip has properly been set to the
printer table.
2. The following are selective status programmable relating to the guest check printer. Ask the store
manager and mark the status selected for your store.
SYSTEM OPTIONS RELATING TO GUEST CHECK CONTROL
• Guest Check Print compulsory for Previous Balance entry, Check Track entry or Drive-through entry:
Standard: COMPULSORY
Option: FREE (Not compulsory)
• Code No. (Check No.) Entry Before [CHECK NO.] key at Endorsement Print (Refer to ENDORSE-
MENT PRINT operation already stated.)
Standard: FREE (Not compulsory)
Option: COMPULSORY
• Date on the guest check
Standard: PRINT
Option: NON-PRINT
3. The gap of the slip inlet is usually opened, and the slip may be inserted or withdrawn freely outside a
receipt/journal print sequence.
When a slip is properly set to the guest check printer and the ECR is operated, the gap will be closed
and printing will be performed. When the sale is finalized and the receipt is issued, the gap of the DRS-
207 will be opened to allow the slip withdrawal. (The gap keeps closed during sale item entries.)
4. The EJECT key on the DRS-207 may be used to open the closed gap in order to withdraw the slip and
skip unnecessary item print. The EJECT key will be disregarded if the slip is set and the ECR receipt/
journal printer is in a printing action.
5. Printing on the guest check will be performed alternately with printing on the receipt/journal of the ECR.
6. When printing of a check requires more than one page, operate as in the following for multi-page process:
1) When printing reaches the last line (limit line) of the first page, printing stops, and the AMOUNT
portion of the display flickers.
2) Withdraw the first page, and insert the second page.
Then depress the [C] key on the ECR Keyboard. Printing resumes.
7. To make an additional order(s) when an entry(ies) has already been made on the check slip, use the
[GCP LINE #] key. For its entry procedure and receipt sample, refer to ADDITIONAL ORDER ENTRY
already stated.