- 25 -
EO1-11113
PLU PRICE CHANGE WITH DLL (Submode 73)
This submode is used to change prices of PLUs and/or the Whole Package Quantity changes of
Split Package Pricing PLUs existent in the PLU files, and to immediately load the data into
Satellite Terminals.
Any time outside a sale for Master or Satellite.
Mode Lock: SET and IN-LINE Lamp illuminated
NOTES: 1. When the [AT/TL] key is depressed in the above operation, it sends a DLL-start
command to the designated terminals, makes the terminals in HOLD condition,
and executes DLL. After DLL is completed, it sends a DLL-end command to each
terminal and releases the HOLD condition.
2. A maximum of 100 PLUs’ prices can be changed in one operation sequence of
this submode.
3. When zero is entered as the New Preset Price value, the PLU is set with a zero
price.
When the New Preset Price entry is skipped and the [#] is simply depressed, it will
be an open-price PLU.
73 [@/FOR] [PLU]
OPERATION
CONDITION
| PLU Code | [ST]
[#]
Can be skipped (for non-Split Pricing type
or when Whole Package Quantity is 1)
| New Preset Price | [AT/TL]
(NOTE 1)
*
* (Repeatable from here for sequentially programming PLU Codes.)
Max. 6 digits
Repeat for
other PLUs. to make open-price PLU
| New Whole Package Quantity |