– 5 –
EO1-11113
4. ADDITIONAL FUNCTION KEY ANDREGISTERING PROCEDURE
The following is the key that can be installed on the Master Terminal of an in-line system, in addition to
the standalone specifications, and the registering procedure using the key.
RTR (Register-to-Register) DECLARATION Key ([RTR])
■By depressing the [RTR] key on the Master Terminal, various in-line jobs
(DLLs, Consolidated Read/Reset Report takings, etc.) can be performed.
PROCEDURE ON A MASTER TERMINAL FOR RTR DECLARATION
Mode Lock: SET, X, Z, or MGR/Anytime outside a sale
Depress [RTR]
NOTES: 1. While a PC job is under way ( a command of ULL, DLL, or Read/Reset from the
PC), this RTR Declaration is not possible. Similarly, while this RTR Declaration is
on, no PC jobs are possible.
2. While the RTR Declaration is on, no transaction entries in REG, MGR, or
mode are possible.
3. While the RTR Declaration is on, no Backup Data Check is performed.
4. While the RTR Declaration is on, the following are jobs to be allowed:
• Programming Operations
• DLL Operations (DLL to Satellite Terminals)
• Consolidated Read/Reset Report takings
• Manual Copying of Backup Data
5. The [RTR] key can be programmed to require Manager Intervention.
6. If the option “Auto Data Copying feature” is selected for Copying of Backup Data,
the RTR Declaration is not possible while a backup data update process is under
way.
■By depressing the [RTR] key on the Master Terminal when the RTR
Declaration is on, the RTR Declaration ON status is canceled.
PROCEDURE ON A MASTER TERMINAL FOR RTR DECLARATION CANCEL
Mode Lock: SET, X, Z, or MGR/RTR Declaration is ON
Depress [RTR]
NOTE: If the Backup Error Flag is ON (the standard error message is “PLEASE BACK UP”),
it means that manual copying of Backup Data is required, and therefore the RTR
Declaration Cancel is not accepted until copying is completed.

RTR