When a Power Failure Occurs | Toshiba FS-1650-4 SERIES, EO1-11099

EO1-11113

WHEN A POWER FAILURE OCCURS ...

If a power failure occurs, all sales data stored in the memory are automatically protected by the battery installed in the ECR. The battery is rechargeable and it is recharged when the AC power returns. As the power returns, the register revives to continue the work and displays the last item entered before the power failure. However, please note the following phenomena to occur on the register when the power is regained:

1.The printer will work to print the entered data without failure after the power recovery, if any data was being printed. However, one extra line may be fed on the power recovery depending on the power- recovery timing.

Example:

RTN

			One extra line is fed here, i.e., a power
			One extra line is fed here, i.e., a power
VEGETABLE	-1.45TF		failure occurred during printing the
RTN			returned item of "VEGETABLE $1.45".
Soup Can	-0.45TF

2.The following are the display indications on the power recovery:

	ECR CONDITION at the		DISPLAY INDICATION on the
	time of Power Failure		Power Recovery

		No key-in has been	Displays zero. Operations may go
		operated.	on.

	OUTSIDE A SALE	Numeric or Declaration keys	Regains the display content that was
		have been entered but not	obtained just before the power
		motorized keys.	failure. The operations may be
			continued.

		No Numeric or Declaration
		keys have been enterd.	Regains the display content that was
			obtained just before the power
			failure. The operations may be
			continued.
	DURING A SALE	Numeric or Declaration keys	continued.
	DURING A SALE	Numeric or Declaration keys
		have been entered.

In the event of a power failure, it is suggested to check the receipt print content before the receipt is handed to the customer.

– 64 –

Image 70

Toshiba FS-1650-4 SERIES, EO1-11099, EO1-11113 owner manual When a Power Failure Occurs

Contents

FS-1650-4 Series Page Meanings of Each Symbol Safety SummarySafety Summary Precaution STAND-ALONE Level OPERATOR’S Guide Table of Contents To OUR Customers Unpacking Appearance and Nomenclature Mode Lock Mode Lock and Mode Selector KeysMode Selector Keys O U N T DisplayO U N DPT Mode Indications Digit Range for Various Sales Items REG, MGR Error Message Table Error Message Cause of the Error Standard Setting Status Lamps Triangular LampsIN-LINE MGR REG SET Outline of Preparation Procedure BE- Fore Operating the ECRREG Installing the Receipt/Journal Roll EO1-11113 Installing the Journal Roll Setting the Ribbon Cassette For single-drawer Machines Cashier Signing or Cashier KEY OperationsCode Entry Method Sign-ON Sign-INSame as those for Single-drawer machines For Multi-drawer MachinesSign-OUT Sign-OFF When Signed-OUT Mode Changes With Signing OperationsWhen Signed-ON or Signed-IN When Signed-OFF PUSH-ON Push-stay Cashier Locks and KeysPUSH-AND-LOCK CLK 4 to CLK CLKCashiers Name Condition Training Mode Start and ENDLOG/RECEIPT or LOG I N G Training Mode Receipt FormatA I N I N G CPN Keyboard LayoutCode Open FS/M Chg Credit 1 to Credit 4 Function 5 to Functions of Each KEY @/FOR AMTOpen VND ALL CorrVoid Txbl Date Credit CardVali SI/TL SI1/TL SI2/TL RPT SalesPerson CUR Total Charge TotalTray TIP Registering Procedure and Print Format Table of Contents Store Message Display RECEIPT-ISSUE/NON-ISSUE SelectionMode Lock may be in any position Receipt on Receipt OFF Status Loan NO-SALEOperation PLU Entry Department EntrySET Menu Entry Department Repeat Open Department Type Modifier PLU EntryRepeat Entry PLU Repeat Open PLU Type Quantity Extension Multiplication for DEPTs/PLUs Preset-Dept Code DP# PR Open or Open Purchased Qty @/FOR Split-Price Type PLU Code PLU Whole Package Price PLU Preset-code KeyPLU Preset-code Key Whole Package Price AMT PLU Price Shift Entry PLU Menu Shift Entry Same as SINGLE-ITEM Department or SINGLE-ITEM PLU EntryOther Income Department ENTRY, Other Income PLU Entry Single-item Receipt Print Format ALL Void Item Corr Order ENTRY, Previous Balance EntryPB Item Corr AT/TL or other media Guest Check Receipt Print Format Order Entry Additional Order EntryAdditional Order Order ENTRY, Check Track Entry Customer File Type Txbl TL Chg Dept Operation Contents KEY OperationPick UP BAL 498 R/A Bottle Return Returned MerchandiseRTN Mdse Dept or PLU item entry for discount from an individual item Percent DISCOUNT, Percent Charge Service ChargeDollar Discount ST for discount from the sale total Amount Doll Disc Item Correct Store CouponVendor Coupon STR CPN NON-ADD Number Print VoidALL Void Void NUMBER-OF-GUESTS Entry Scale Entry Selective Itemizer SI Status Modification Listing Capacity OpenTAX Status or Food Stamp Status Modification Irregular Tax Amount to be Added TAX Taxable Total Read and Subtotal PrintTxbl TL TAX Calculation and Print Selective Itemizer SI Total ReadTAX Exemption Fstl Tend Food Stampable Total READ, Food Stamp TenderingSale Finalization by Media Keys Check Tend MULTI-TENDERING Split Tendering Txbl TL CUR1 Check Cashing No-sale cashing of a non-cash mediaSale Paid in Foreign Currencies CUR1 NO-SALE Exchange from Domestic Currency to Foreign Currency NO-SALE Exchange from Foreign Currency to Domestic CurrencyCUR RECEIVED-ON-ACCOUNT PAID-OUT Function Salesperson Entry Salesperson Sign-ONFunction KEY Entry Function 1 to Function Cashier Code TIP Paid Tip Amount TIP PaidCharge TIP Media as the tip Post-issue Receipt Receipt POST-ISSUEReceipt Issue Operation must be operated outside a sale Sale is finalized EAT-IN/TAKEOUT Entry Eat-in Symbol Takeout SymbolTray Total EAT DRIVE-THROUGH Entry Call No. SymbolCall NO. Entry Call NO. Call No Recall Item Corr Recall EntryValidation Print AT/TL or other media Endorsement Print Check Tend key Guest Check Printer hardware option Operation System Options Relating to Guest Check Control When a Power Failure Occurs Guest Check Printer Motor Lock Detector Journal and Receipt PAPER-END DetectorECR Printer Motor Lock Detector Printer Guide Open Detector Paper Roll Replacement and Other MAIN- Tenance Operations Load new paper roll as described in Chapter Wound-up portion of the paper can be easily removed From the Reel by pulling it sideways Replacing the Ribbon Cassette To remove the Receipt Cover, insert the Receipt Cover Key To the Receipt Cover Lock, and turn it 90 clockwise Manual Drawer Releasing Locking Unlock the cover using the key, and lift the front endUnlocking Specifications STAND-ALONE Level MANAGER’S Guide Table of Contents CASHIER’S Operations Daily Operation FlowMANAGER’S Operations or Assistance Manager Intervention Manager Intervention RTN Mdse Void Doll Disc VND CPN STR CPNBTL RTN TIP Paid CHG TIP Function Keys Amount Limit Read Other Operations Requiring Manager INTER- VentionsNegative Amount KEY Amount Limit Read Pick UP Operation MANAGER’S OWN Operations in MGR ModeMode Lock MGR Any time outside a sale, in a Signed-ON condition Enforced SIGN-OFF a Cashier Code Entry Method Cashier Code and Name Read Ordinary Operations in Mode Operations in ModeOperation and Receipt Sample Previous Balance AMT Customer File Code* Pick UP BAL or Code OpenEntries of purchased items Entries of the returned items equivalent to Manager Intervention Required STATUS, Amount Limit in Mode Scale Item Entry in ModeProhibitive Operations in Mode NO-SALE NS AUTO-SCALE described Report Name Mode KEY Operation Sample Lock Read X and Reset Z ReportsDaily Reports PLU Read and Reset Hourly Range Read and ResetDepartment Read and Reset Order Table Read and Reset Report Name Mode Lock KEY Operation Sample GT Reports -- to be taken on weekly or monthly basis GTX GTZ Combination ReportsReport Name Available Reports GTX Read Report Relevant Reset Report General Notes on Report Takings Final Read or Reset Daily or GT I N a N C I a L Amount Cashier Read or Reset Daily or GT Reset Report Format Sample Credit Card Company Sales Read or Reset Daily or GT Daily Salesperson Read or ResetMode Lock X for read Enter For reset Depress AT/TL Mode Lock X, enter 12, depress AT/TL Department Group Read Daily or GT Total Read read only Daily Hourly Range Read or ResetDaily Media Sales and IN-DRAWER AT/TL TEC Store Dept Vegetable Dept Fruit TEC StoreP I N D I P a L L All Department Read or Reset Daily or GTReset Report Sample Airy L U I N D I Zone PLU Read or Reset Daily or GTL U Z O N E L U a L L L U Z E R O R D E R #01 $3.24 #02 $9.11 #03 0001Z $7.28 0280 1910TM All Files with balance remaining Read or ResetZone Files Read or Reset Debit-balance Files Read Individual Files Read GT Reports PLU Group Sales Read or Reset Daily or GTL U G R O U P Programming Operations Table of Programming Operations Keyboard Variations in Programming operations Basic Key FunctionsUsed to end the entire program Submode sequence Character Entries Lll Character Code Entry MethodCharacter Code Standard Characters Column Code Row Code 407 # Character Setting OperationsAll Double-sized Declaration Direct Character Entry Method Shift Keys 1 to 4, Shift Lock Key Using TKB-1 Programming Keyboard hardware optionIs entered in the Shift 1 mode Character Keys Operation Examples Using TKB-1 KeyboardFunction Keys Dept 2 2 ST Space Condition Required for Programming Operations Mode Lock SET A C H D R I V E Cashier Code and Name Programming Submode Programming Cashier Code 2 Name SMITH, Status 0 for Sale Entries To program the following cashier dataCashier Code 1 Name JONES, Status 0 for Sale Entries Cashier Code 3 Name MEAL, Status 1 for Training Entries Deletion Cashier Code NS Programming or Changing PLU Table Programming SubmodeCondition Operation Address No Description of Programming Contents Vacant Net to S.I ? Yes Whole Package Quantity for Split Package Pricing PLUs Cancel the Split Package Pricing statusSetting is not allowed to any PLUs PLU Group No. for purposes of reports To program the following PLUs PLU PLU 1 ST AT/TL to end Item Corr 90701 PLU DeletionItem Corr ALL Void AT/TL PLU Programmed Data Copying MON #1 @/FOR Time Setting or Adjustment SubmodeDate Setting or Adjustment Submode Hour Minute Repeat for another key Amount Limit Setting for Function Keys SubmodeKey Code ST Amount Limit Set Value # CHK TND Deletion of All Customer File Codes Customer File Code Check Track NO. and Name Setting SubmodeDeletion of Individual Customer File Codes Repeat for other codes to be deleted Name James Haily Helen Reed Code105 ST Salesperson Code and Name Programming Submode Mode Lock SET Salesperson Code ST Character EntriesProgramming Salesperson Code ST After Daily Salesperson Reset Mode Lock SETItem Corr 3 ST Tare Table and General Unit Weight Setting Submode ST 13 # 2 AT/TL 27 @/FOR PLU PRESET-CODE KEY Setting SubmodeRequired key PK-2 Keyboard Display Message Programming Submode Message Line No. ST Character Entries ST E D SpaceSpace TEC Store KEY Code and KEY Table Negative Amount KEY Limit Amount Setting Submode35 @/FOR Key CodeST VND CPN STR CPN BTL RTN Doll Disc SET Menu Table Programming Submode 42 @/FOR Department Preset Price Setting or Changing 13 DP# 140 # Mode Lock SET PLU 155 # PLU 65 # PLU 6 ST 125 # + and %- Preset Rate Setting Or SI/TL Preset Rate Setting for Selective Itemizers SI1 and SI2SI1/TL SI2/TL Selective Itemizer Functions and Applications SI-net SymbolBe issued Receipt/Journal Print Foreign Currency Exchange Rate Calculation Foreign Currency Exchange Rate SettingMode Lock SET Exchange Rate for Foreign Currency CUR5 Deutsche Mark Resetting a Foreign Currency Rate Once SetDomestic TYPE2 TAX 1 Combination of NON-CYCLIC Breaks and % Rate TAX Table ProgrammingTX1/M TYPE3 TAX 1% Rate only $0.10 TX2/M 29 TX2/M 59 TX2/M 84 TX2/M 112 TX2/M TX3/M Any time outside a sale Mode Lock SET GST Rate GST Rate Setting12 GST/M Mode Lock SET 3001 # STORE/REGISTER NO. SettingMode Lock SET Store/Register No Register No. of this terminal Selective Itemizer Rate Foreign Currency Exchange Rate Verification of Programmed DataGST Rate Tax Calculation Test Mode Lock X or SET Enter any amountDepress Txbl TL Level OPERATOR’S Guide Table of Contents Introduction System Configuration Hardware Composition Hardware DescriptionCommunication Sequence Operator Display Indications of MASTER-SATELLITE System Error Messages Procedure on a Master Terminal for RTR Declaration Cancel Additional Function KEY and Registering ProcedureProcedure on a Master Terminal for RTR Declaration RTR Register-to-Register Declaration Key RTR Level MANAGER’S Guide Other Operations Relating to IN-LINE Service Master and Back UP Master Alternation Sign ON, Sale Entries, Sign OFF Turn on the power of every ECR in the in-line systemMaster Terminal Read X Report Takings on Individual Terminals Consolidated Report Data Read Department and PLU Mainte Terminal Open Check Operations Before IN-LINE ServiceMode Lock X and IN-LINE Lamp illuminated Any time outside a sale operable on Master Terminal Register No Terminal Designation# 3003 # AT/TL Master Terminal Receipt Print Terminal Condition CheckRKP Remote Kitchen Printer Condition Check 82 AT/TL Customer File Read and Reset Reports Read and Reset ReportsDaily Reports Report Name Cashier Read and Reset Reports GT Reports Report Name Cashier GT Read and Reset Reports Conditions required on terminals for In-line Report takings IN-LINE Report Command ExecutionsIN-LINE Reports Lock Positions Required Operation Flow of IN-LINE Read or Reset Reports 202 AT/TL 200 AT/TL201 AT/TL 203 AT/TL 11 AT/TL 10 AT/TL12 AT/TL 24 AT/TL 13 AT/TL13 # 0 AT/TL 15 AT/TL Process Reports and Base Report Data IN-LINE Report Print Format IN-LINE Report Type Enforced Clear of Hold Condition on Individual Terminals Operations After IN-LINE Report TakingsConsolidated Report Data Read Reprint 90 AT/TL Programming Operations Common with Standalone ECR Level Programming JOB List Programming Operations Added for IN-LINE Terminals Table of Programming Operations After Addition 69 @/FOR Terminal Connection Table Setting SubmodeMode Lock SET and IN-LINE Lamp illuminated In-line ID No. ST Register No. # Any time outside a sale Mode Lock SET Terminal ID No. AT/TL Terminal ID Setting Submode77 @/FOR 169 AT/TL 177 AT/TL DLL JOB List DLL Job Remarks Print Format of DLL Operations Department and PLU Maintenance Table of Department and PLU Maintenance Operations PLU Table ADDITION/CHANGE/DELETION with DLL Submode 12 ST Any time outside a sale for Master or Satellite New Preset PricePLU Code PLU 72 @/FOR PLU Price Change with DLL Submode 73 @/FOR Cashier Occupy Inquiries InquiriesCustomer File Check Track Inquiries RKP Print Data Transmission RKP Condition Check Inquiries Backup Function Only When the Backup Master is Connected EO1-11113 EO1-11113 900 AT/TL RKP Data Print from RECEIPT/JOURNAL Master and Backup Master AlternationTransmission Error Nal Error Canceling Process Cause of ErrorError Display IRC Connect ERR Other Operations Relating to IN-LINE Service Table of Contents Time OUT Master Terminal Incomplete Ending SuspendingRetry Description Cancel Cancel symbol is printed as in the following