- 10 -
EO1-11113
5. READ (X) AND RESET (Z) REPORTS
The following table shows the key operation to take each report. The “X” and “Z” reports have exactly the
same print content if both are available, except that:
1. The “X” reports allow to read the sales data but not clear memories, while the “Z” reports allow to
read the sales data and at the same time all the resettable memories will be cleared when the
reports have been issue.
2. The symbol “X…” is printed on the top line of a Daily Read Report, “Z…” on a Daily Reset Report,
“GTX…” on a GT Read Report, and “GTZ…” on a GT Reset Report, as initial settings.
3. A reset count is printed on the bottom of a “Z” report only.
TABLE OF OPERATIONS FOR X AND Z REPORTS

Daily Reports

WARNING!
When opening the cash drawer, be careful not to let the drawer hit any person.
MODE
LOCK KEY OPERATION SAMPLE
PAGE
REPORT NAME
FINANCIAL READ AND RESET 15
• Financial Read X
• Financial Reset Z
CASHIER READ AND RESET 17
• All Cashier Read X
• All Cashier Reset Z
• Individual Cashier Read X

Code Entry Method:

• Individual Cashier Reset Z 4 [#] |Cashier ID Code| [AT/TL]
(2-digit manager-assign code)

Cashier Key Method:

Set the required Cashier Key
(or depress the required Cashier
Key), then 4 [#] [AT/TL]
SALESPERSON READ AND RESET 18
• All Salesperson Read X
• All Salesperson Reset Z
CREDIT CARD COMPANY SALES READ 18
AND RESET
• Credit Card Company Sales Read X
• Credit Card Company Sales Reset Z
DEPARTMENT GROUP READ X 8 [AT/TL] 19
MEDIA SALES AND IN-DRAWER TOTAL READ X9 [AT/TL] (Drawer opens.) 20
5 [AT/TL]
6 [AT/TL]
3 [AT/TL] (Drawer opens.)
4 [ST] (Drawer opens.)