Toshiba Electronic Cash Register Selective Itemizer Functions and Applications, SI1%RATE SI1 TL

5. PROGRAMMING OPERATIONS EO1-11138

5.4 How to Access a Program Item

Journal Print

P00	SI1%RATE	7%
SI1 TL
	0140	11:04TM

NOTES: 1. Whether the calculated amount by the preset SI % rate affects (i.e. add to or subtract from) the sale total is determined by a program option.

2.To reset the rate once set, enter 0 as the rate. (Then the rate is regarded as 100% if the option “Non-affect” is selected. With the option “SI Affects Sale Total”, some rate other than “0” should be programmed.)

Selective Itemizer Functions and Applications

The “Selective Itemizer” is a temporary total memory for each sale and is activated separately from the Main Itemizer (i.e. sale total memory). If certain PLU items are programmed with the SI (selective itemizer) “net” status, the Selective Itemizer will function to add up amounts of the SI-net status items in registering the items, while the Main Itemizer will function to add up all the items in the sale. Thus, near the sale finalization, the operator may read the SI content by depressing the [SI/TL] key.

A preset % rate may be programmed for each of SI1 and SI2 (on the preceding page), and whether the calculated amount will add to, subtract from, or non-affect the sale total is a program option. Whether the amount resulted by depressing the [SI/TL] key will print or non-print is another program option.

The applications of this function may vary from store to store. Some stores may use it for counting the service stamps to be issued to the customers according to the sale amount of service-stampable items. In this case, the option “SI Total Non-affects Sale Total” should be selected, and a preset % rate, 1% for example, may be set to issue one service stamp for every $1.00. Thus the number of stamps to be issued to the customer is displayed (and printed if so programmed) as a result of calculation with the preset % rate, but the resulted value (the number of stamps in this case) will not affect the sale total.

Example 1) With option “SI Total Non-affects Sale Total”:

Key Operation in REG Mode Receipt/Journal Print

1 [PLU] (SI-net)

2 [PLU] (non-SI)

3 [PLU] (SI-net)[SI/TL] (1% is preset)

[AT/TL]

1	PLU000001	1.00TS
1	PLU000002	1.50T
1	PLU000003	2.00TS
SI1 TL		0.03
SUBTL		4.50

S: SI-net Status

Number of stamps to be issued.

PLU 1 and PLU 3 are programmed with SI-net-status. On depressing [SI/TL], “0.03” (which is 1% of total amount of PLU 1 “1.00” + PLU 3 “2.00”) is displayed and printed, and 3 stamps are to be issued to the customer in this case. The sale total “4.50,” is not affected by the SI calculation.

Other stores may use it for calculating the discount amount for certain sales items during a special discount sales period by presetting the discount % rate on the SI and programming SI-net status to certain PLUs which are subject to the special discount.

5-60