4. READ (X) AND RESET (Z) REPORTS EO1-11138
4-9
4.3 Combination Reports
You can issue a combination report which consists of a maximum of 5 reports selected from the list shown below,
and you can program your own 3 combination reports. As for the programming, refer to the next chapter
PROGRAMMING OPERATIONS.
REPORT NAME REPORT AVAILABLE
Financial Report X Z GTX GTZ
All Cashier Report X Z GTX GTZ
Credit Company Sales Report X Z GTX GTZ
Department Group Report X GTX
Media Sales and In-drawer Report X
Hourly Range Report X Z
All Department Report X Z GTX GTZ
All Media Sales & Cash-in-drawer Report X
All PLU Report X Z GTX GTZ
All PLU Stock Report X
All Guest File Report X Z
PLU Group Sales Report X Z GTX GTZ
Day Part Report X Z
Check Track with Sales Report (All Cashier) X Z
Check Track without Sales Report (All Cashier) X
All Combo Sale Report (detail) X Z
Hourly Combo Sale Report X Z
Employee Clock-in/Clock-out Report X Z
Employee Clock-in/Clock-out Report (weekly) GTX GTZ
Employee Clock-in/Clock-out Report (periodic) GTX GTZ
KEY OPERATION: Mode Lock: X for Read
Z for Reset
Enter the Report No.:
None (simply depress [AT/TL]): Daily Combination Report 1
200: GT Combination Report 1
1: Daily Combination Report 2
201: GT Combination Report 2
2: Daily Combination Report 3
202: GT Combination Report 3
* As for the daily combination reports 1 to 3, you can issue them by simply depressing the corresponding
navigation keys COMB1 to COMB3.

NOTES: 1. If a report in which the issue mode does not match the mode lock position to take a combination

report is contained in a combination report table, that report issuance will be skipped.

2. The all department report and the financial report are initially programmed to the combination

report 1 (daily and GT).

3. Whether the drawer opens or not depends on the reports contained in a combination report table.

4.3 Combination Reports
| | [AT/TL]