Windows Network Configuration
Network Configuration for Windows 98SE and Windows Me:
The following is an example of how to configure a Windows 98SE and Me PC for TCP/IP network settings:
Step 1: At the Windows Desktop, click “Start”, then select “Settings”, and click “Control Panel” as shown in the screen below. The Control Panel window will appear.
Step 2: At the Control Panel window, select and double click on the “Network” icon.
Step 3: In the Network panel window, scroll down to the TCP/IP network adapter in your computer. Select the “TCP/IP” line item and click on the “Properties” button.
Step 4: In the TCP/IP Properties panel, choose the “Obtain an IP address automatically” button and then press the “OK” button.
Step 5: Once you have completed the steps above, a notice to restart your computer will come up. Restart your computer.
Step 6: You should now be able to access the PCX5000 configuration pages. Launch the
browser and open location:” http://192.168.100.1” Proceed to the “Configuring the PCX5000 Gateway” section of this manual.
17
