Toshiba Pro 4600 Series Removing a memory module

112	Expansion Options
	Installing additional memory (optional)

6Gently press the free edge of the memory module into the slot until the latches snap, holding the memory module in place.

Seating the memory module

7Replace the expansion memory slot cover and secure it with the screws you removed earlier

8Turn the computer over and reconnect any cables you removed.

When you turn on the computer, it automatically recognizes the additional memory. If the computer does not recognize the memory, shut down the computer, remove the memory slot cover and make sure the memory modules are seated properly, as described in step 6.

Removing a memory module

The memory module is accessed from the underside of the computer. You need a standard Phillips no. 1 screwdriver to remove the expansion memory slot cover.

To remove a memory module:

1Shut down the operating system, close the display panel and remove any cables.

2Turn the computer over and locate the expansion memory slot cover. If you need help, see Underside on page 33.